STONEX S900T User Manual

Stonex S900A GNSS Receiver – User Manual 23
4.1.3 RMS Study and Sensor Calibration
You can check the accuracy of the tilt compensation through the RMS quality
check.
If the accuracy (RMS) is good, then you can continue working. If the accuracy
(RMS) is not good, then calibrate the sensor using the Calibrate Sensor tool.
The RMS Study performs the study of the quality/accuracy of repeated
measures (keep the pole tip at the same exact position on the ground).
How to use it?
Open the Calibrate menu, then select the RMS Study command.
When inside the RMS Study screen, click Start to collect the measures.

STONEX S900T Specifications

General

Brand	STONEX
Model	S900T
Category	Receiver
Language	English