-.3.-
3. DISASSEMBLY AND REASSEMBLY
3-1 PREPARATIONS AND SUGGESTIONS
(1)..When.disassembling.the.engine,.memorize.the.locations.of.individual.parts.so.that.they.can.
be.reassembled.correctly.If.you.are.uncertain.of.identifying.some.parts,.it.is.suggested.that.
tags.be.attached.to.them
(2)..Have.boxes.ready.to.keep.disassembled.parts.by.group
(3)..To.prevent.losing.and.misplacing,.temporarily.assemble.each.group.of.disassembled.parts
(4)..Carefully.handle.disassembled.parts,.and.clean.them.with.washing.oil.if.necessary
(5)..Use.the.correct.tools.in.the.correct.way
(6)..When.disconnecting.electric.wirings,.be.sure.to.hold.and.disconnect.the.connector.housing
3-2 SPECIAL TOOLS
No.Special.Tool.is.needed.for.disassembling.and.reassembling.the.engine
For.pulling.off.the.flywheel,.universal.type.puller.being.popular.in.the.market.place.as.shown.in.
the.illustration.is.needed.
Description Parts number
Flywheel.puller.for.pulling.off.the.flywheel
Flywheel puller with bolt
228-95001-17
To Next Page
Loading...
Need help?
General
