8OJS024
3) Continue to lift up the hood until it
is
high enough to support with the prop
rod.
To
close the engine hood:
1)
Lift the hood up slightly and remove the
prop rod from the
hole. Put the prop rod
back to the
holding clip.
2) Lower the hood close to the bumper,
then
let it drop down. Make sure the
hood is
securely latched after closing.
A WARNING
Make
sure
the
hood
is
fully
closed
and
latched before
driving.
If
it
is
not,
it
can
fly
up
unexpectedly
during
driving,
obstructing
your
view
and
resulting
in
an accident.
OTHER CONTROLS AND EQUIPMENT
Sun
Visor
f)
-~
79J161
The sun visors can
be
'pulled down to block
glare
coming through the windshield, or
they can
be
unhooked and turned to the
side to
block glare coming through the side
window.
CAUTION
When
unhooking
and
hooking
a
sun
visor, be
sure
to
handle
it
by
the
hard
plastic
parts
or
the
sun
visor
can
be
damaged.
Interior
Light
Switch
EXAMPLE
(3) (2)
(1)
"I
11
OFF
DOOR
ON
[C~::J
1
J-------l
64Jl04
This light switch has three positions which
function as described
below:
ON
(1)
The
light comes
on
and stays on regard-
less of whether the door is open or closed.
DOOR
(2)
The
light comes on when the door is
opened. After
closing all doors, the light
will remain on for about 15 seconds and
then fade out.
If you push
in
the ignition
switch or insert the key during this time, the
light will start to fade out immediately. After
removing the key from the ignition switch,
the
light will turn
on
for about 15 seconds
and then fade out.
OFF (3)
The
light remains off even when the door is
opened.
5-36