104
5-1. Parking assist monitor
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected
by a SUZUKI dealer or a qualified workshop.
Things you should know
If you notice any symptoms
Symptom Likely cause Solution
The image is difficult to
see
The vehicle is in a dark
area
The temperature around
the lens is either high or
low
The outside temperature
is low
There are water droplets
on the camera
It is raining or humid
Foreign matter (mud etc.)
is adhering to the camera
Sunlight or headlights
are shining directly into
the camera
The vehicle is under fluo-
rescent lights, sodium
lights, mercury lights etc.
Back up while visually
checking the vehicle’s sur-
roundings. (Use the moni-
tor again once conditions
have been improved.)
The procedure for adjusting
the picture quality of the
parking assist monitor is
the same as the procedure
for adjusting the screen.
(P.23)
The image is blurry
Dirt or foreign matter (such
as water droplets, snow,
mud etc.) is adhering to the
camera.
Flush the camera with a
large quantity of water and
wipe the camera lens clean
with a soft and wet cloth.
The image is out of align-
ment
The camera or surround-
ing area has received a
strong impact.
Have the vehicle inspected
by a SUZUKI dealer or a
qualified workshop.