Suzuki ACROSS User Manual

116
6-1. Phone operation (Hands-free system for cellular phones)
1 Select “Answer” or press the
switch on the steering wheel to
talk on the phone.
“Decline”: Select to refuse to receive
the call.
To adjust the volume of a received call:
Turn the “POWER VOLUME” knob, or
use the volume control switch on the
steering wheel.
● During international phone calls, the
other party’s name or number may not
be displayed correctly depending on
the type of cellular phone you have.
● The incoming call display mode can
be set. (P.124)
● The ringtone that has been set in the
sound settings screen can be heard
when there is an incoming call.
Depending on the type of Bluetooth
®
phone, both the system and
Bluetooth
®
phone may ring simultane-
ously when there is an incoming call.
(P.123)
Select to display the keypad to
send tones. (P.117)
Select to send tones. This but-
ton only appears when a num-
ber that contains a (w) is dialed
in hands-free mode. (P.117)
Select to adjust your voice vol-
ume that the other party hears
from their speaker. (P.117)
Select to mute your voice to the
other party.
Select to change handset
modes between hands-free and
cellular phone.
Select to put a call on hold. To
cancel this function, select “Acti-
Receiving a call using
the Bluetooth
®
hands-
free system
When a call is received, the fol-
lowing screen is displayed
with a sound.
Incoming calls
Talking on the
Bluetooth
®
hands-free
system
While talking on the phone, the
following screen is displayed.
The operations outlined below
can be performed on this
screen.
Call screen operation
A
B
C
D
E
F

Suzuki ACROSS Specifications

General

Brand	Suzuki
Model	ACROSS
Category	Car Receiver
Language	English