3-28
FUEL TANK CAP
Open the lid.
Insert the key and turn it clock-
wise to open the fuel tank cap
with the key still held in a position,
lift up on the key and remove the
cap. To install the fuel tank cap,
face the triangle mark towards
you and line up the fuel tank cap
guide pins. Push down the fuel
tank cap until the locking pins
click into position. The key must
be in the cap lock before installing
the cap.
Use fresh gasoline when filling up
the fuel tank. Do not use bad gas-
oline which is contaminated with
dirt, dust, water or other liquid. Be
careful that dirt, dust or water
does not enter the fuel tank when
refueling.
NOTE: The fuel tank has a pres-
sure regulator around the fuel
tank inlet to release pressure
when the fuel tank becomes hot.
The fuel tank pressure regulator
may whistle when it releases fuel
tank pressure.
NOTE:
• When refueling, hold the tip of
fuel nozzle against crossbar in
fuel inlet as illustration.
• Stop filling the fuel tank after
the fuel nozzle automatically
clicks off. Do not try to “top off”
the fuel tank. Leave some
room for the fuel to expand
from temperature increase.
To Next Page
Loading...
Need help?
General
