7-34
INSPECTION AND MAINTENANCE
79MS0-14E
(Vehicle with trunk trim)
79MS0T705
1) Open the trunk lid. Remove the clips (1)
by prying it off with a flat blade screw-
driver as shown in the illustration. Then,
pull out the trim (2).
79MS0T706
2) Disconnect the coupler (3) by pushing
the lock release. Turn the bulb holder
(4) counterclockwise and remove it.
License Plate Light
79MH0755
Open the trunk lid and remove the trunk
trim (if equipped). Remove the bulb holder
(1), turn the holder counterclockwise and
remove it.
NOTE:
The method to removing trunk trim, refer to
the procedure for the bulb replacement of
the “Reversing Light” described above.
(1)
(2)
To Next Page
Loading...
Need help?
General
