2-47
BEFORE DRIVING
79MS0-14E
Thermometer
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
display (A) shows the thermometer.
The thermometer indicates the outside
temperature.
68LM258
If the outside temperature nears freezing,
the mark (a) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”, the display may
not indicate the outside temperature.
When the display (C) shows the driving
range, you can change the unit of tem-
perature.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (2), turn the indicator selector knob
(3).
68LM259
NOTE:
When you change the unit that tempera-
ture is displayed in, the air conditioning
system temperature display unit will be
changed automatically.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
Transaxle selector position indica-
tor (for CVT vehicles)
68LM260
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
display (B) indicates the gear position (b).
For details on how to use the transaxle,
refer to “Using the Transaxle” in the
“OPERATING YOUR VEHICLE” section.
(a)