3-26 MOTOR INSTALLATION
LIFTING MOTOR
MOVING THE MOTOR
IN A VERTICAL POSITION
All three lifting eyes should be used after the engine has been
removed from the crate and is in a vertical position.
WEIGHT BY MODEL SPECIFICATION
DO NOT USE FRONT LIFT EYE
WHEN UNCRATING THE MOTOR
The front lift eye is not designed nor intended to be
used for removing the motor from its horizontal posi-
tion in the shipping crate. Attempting to lift the motor
from its horizontal crated position using the front lift
eye creates a chain or sling angle which can cause the
motor to swing when it is lifted. This may result in per-
sonal injury or cause damage to the engine block.
Use a hoist which has a minimum lift capacity of at
least 450 kg (1 000 lbs.) when lifting the motor.
EXAMPLE OF LIFTING DF200/225/250
EXAMPLE OF LIFTING DF90/115/140
Weight by model specification Weight by model specification
DF25-V2
Manual
S 69 kg
DF90
DF115
Electric
L 189 kg
L 72 kg X 194 kg
Electric
S 74 kg
DF140 Electric
L 186 kg
L 77 kg X 191 kg
DF25Q
DF30Q
Manual
S 93 kg
DF150 Electric
L 211 kg
L 96 kg X 215 kg
DF25Q
DF30Q
Electric
S 95 kg
DF175 Electric
L 211 kg
L 98 kg X 215 kg
DF25T
DF30T
Electric
S 93 kg DF200 Electric X 263 kg
L 96 kg
DF225 Electric
X 263 kg
DF40QH Electric
S 108 kg XX 268 kg
L 111 kg
DF250 Electric
X 263 kg
DF50TH Electric
S 107 kg XX 268 kg
L 110 kg
DF40
DF50
Electric
S 107 kg
L 110 kg
DF60
DF70
Electric
L 162 kg
X 167 kg
To Next Page
Loading...
Need help?
General
