SEAT LOCK
To remove the seat, insert the ignitior
key into the lock and turn it clockwise
Raise the rear end of the seat
an(
slide it backward.
To reinstall the seat, slide the sea
hooks into the seat hook retainer!
and push down firmly until the sea
snaps into the locked position.
Latch the seat securely in its
proper position.
Failure to install the seat properly
could allow the seat to move and
cause loss of rider control.
A
small and light article such as rair
gear or a windbreaker can be place(
under the seat.
Loading limit:
2
kg
(4.5
Ibs)
HELMET HOLDER
l
;
1
,
-
\I
-
U
Ise helmet holder wire as shown to
ook the helmet.
Riding with a helmet fastened to
the helmet holder can interfere
with rider control.
Never carry a helmet fastened to a
helmet holder.
Fix
the helmet
securely atop the seat if you must
carry it.
To Next Page
Need help?
General
