RIGHT HANDLEBAR
ENGINE STOP SWITCH
@
"ZX"
position
The ignition circuit is off. The engine
cannot start or run.
"C)"
position
The ignition circuit is on and the
engine can run.
FRONT BRAKE LEVER
@l
The front brake is applied by squeez-
ing the brake lever gently toward the
throttle grip. This motorcycle is
equipped with a disk brake system
and excessive pressure is not
required to slow the machine down
properly. The brake light will be lit
when the lever is squeezed inward.
Front Brake Lever
/
T
a
a
P
a
P
I€
a
a
S
a
fr
S
Adjustment
'he distance between the throttle grip
nd the front brake lever is adjustable
mong
6
positions. To change the
osition, push the brake lever forward
nd turn the adjuster to the desired
osition. When changing the brake
?ver position, always be sure the
djuster stops in the proper position;
projection of the brake lever holder
hould fit into the depression of the
djuster. This motorcycle is delivered
,om the factory with its adjuster set
n position
4.
Adjusting the front brake lever
position while riding can be haz-
ardous. Removing a hand from the
handlebars can reduce your ability
to control the motorcycle.
Always keep both hands on the
handlebars while riding.
To Next Page
Loading...
Need help?
General
