Suzuki GSX1250FA User Manual

6-44
8. Draw out the axle shaft.
9. Slide the front wheel forward.
10. To reinstall the wheel assembly,
reverse the sequence described
above.
11. After installing the wheel, apply
the front brake several times to
restore the proper lever stroke.
 WARNING
Failure to extend brake pads after
installing the wheel can cause
poor braking performance and
may result in an accident.
Before riding, “pump” the brake
lever repeatedly until the brake
pads are pressed against the
brake disks and proper lever
stroke and firm feel are restored.
Also check that the wheel rotates
freely.
 WARNING
If the bolts and nuts are not prop-
erly tightened, the wheel can
come off, causing an accident.
Be sure to tighten the bolts and
nuts to the specified torque. If you
do not have a torque wrench or do
not know how to use one, ask
your authorized Suzuki dealer to
check the bolts and nuts.

Suzuki GSX1250FA Specifications

General

Engine Type	4-stroke, liquid-cooled, DOHC
Engine Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Starter	Electric
Transmission	6-speed constant mesh
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Disc, twin
Rear Brakes	Disc
Front Tire Size	120/70ZR17M/C (58W), tubeless
Rear Tire Size	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Wheelbase	1485 mm
Seat Height	805 mm
Curb Weight	257 kg
Fuel Tank Capacity	19.0 L