2-6
“OFF” Position
All electrical circuits are cut off. The engine
will not start. The key can be removed.
“ON” Position
The ignition circuit is completed and the
engine can now be started. The key cannot
be removed from the ignition switch in this
position.
“LOCK” Position
To lock the steering, turn the handlebar all
the way to the left. Push the key in and turn
it to the “LOCK” position and remove the
key. All electrical circuits are cut off.
Seat Lock Release
Turn the key counterclockwise to release the
seat lock.
I
G
N
I
T
I
O
N
L
O
C
K
O
F
F
O
N
S
E
A
T
O
P
E
N
P
U
S
H
SHUT
OPEN
WARNING
Turning the ignition switch to the
“LOCK” position while the motorcycle is
moving can be hazardous. Moving the
motorcycle while the steering is locked
can be hazardous. You could lose your
balance and fall, or you could drop the
motorcycle.
Never attempt to move the motorcycle
when the steering is locked.
To Next Page
Loading...
