6-29
GEAR OIL
1. Remove the clutch cover cap 1 by
removing the bolts.
2. Place an oil pan under the final gear
case.
3. Remove the oil level plug 2 and inspect
the oil level. If the level is below the level
hole, add oil until it flows out from the
level hole.
4. Tighten the oil level plug 2.
NOTE: If oil is dirty with sludge or used for a
long period, drain the oil by removing the
drain plug 3 and pour fresh oil through the
oil level hole.
To Next Page
Loading...
Need help?
General
