6-28
8. Replace the oil filter cover and tighten
the bolts securely but do not overtighten
them.
9. Replace the drain plug and tighten it
securely. Pour fresh oil through the filler
hole. Approximately 1000 ml of oil will be
required.
NOTE: Approximately 900 ml of oil will be
required when changing oil only without
replacing the oil filter.
10. Tighten the oil filler cap.
11. Start the engine and allow it to idle for a
few minutes.
12. Check the oil level according to Oil Level
Check procedure.
NOTE: Check to see that no oil is leaking
from the oil filter cover.
CAUTION
Engine damage may occur if you use oil
that does not meet Suzuki’s specifica-
tions.
Use the oil specified in the FUEL AND
ENGINE OIL RECOMMENDATION sec-
tion.
To Next Page
Loading...
Need help?
General
