Declaration of Conformity |
1
1 Declaration of Conformity
Manufacturer
Systemair Sverige AB
Industrivägen 3
SE-739 30 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
hereby confirms that the following products:
Air handling units
EL Topvex SF02 Topvex SF03 Topvex SF04 Topvex SF06
HWL Topvex SF02 Topvex SF03 Topvex SF04 Topvex SF06 Topvex SF08 Topvex SF12
HWH Topvex SF02 Topvex SF03 Topvex SF04 Topvex SF06 Topvex SF08 Topvex SF12
(The declaration applies only to product in the condition it was delivered in and installed in the facility in accordance with the included
installation instructions. The insurance does not cover components that are added or actions carried out subsequently on the
product)
Comply with all applicable requirements in the following directives and regulations
Machinery Directive 2006/42/EC Ecodesign Directive 2009/125/EC
327/2011 Requirements for fans
1253/2014 Requirements for ventilation units
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
The following harmonized standards are applied in applicable parts:
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction
EN 13857
Safety of machinery – Safety distances to prevent hazard zones being reached by upper
or lower limbs
EN 60204-1
Safety of machinery – Electrical equipment of machines – Part 1: General requirements
EN 60335-1
Household and similar electrical appliances – Safety Part 1: General requirements
EN 60335-2-40
Safety of household and similar electrical appliances - Part 2-40: Particular requirements
for electrical heat pumps, air-conditioners and dehumidifiers
EN 50106:2007
Safety of household and similar appliances – Particular rules for routine tests referring to
appliances under the scope of EN 60 335-1 and EN 60967
EN 60529
Degrees of protection provided by enclosures (IP Code)
EN 62233
Measurement methods for electromagnetic fields of household appliances and similar
apparatus with regard to human exposure
EN 61000-6-2
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for
industrial environments
EN 61000-6-3
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standards
for residential, commercial and light-industrial environments
The complete technical documentation is available.
Skinnskatteberg, 15-03-2016
Mats Sándor
Technical Director
130324 | A004
To Next Page
Loading...
Need help?
General