Product information |
7
3.3 Transport and storage
The unit is delivered in one piece standing on a pallet for easy transportation using a forklift. The unit should be stored
and transported in such a way that it is protected against physical damage that can harm panels, handles, display etc. It
should be covered so that dust, rain and snow cannot enter and damage the unit and its components. The appliance is
delivered complete with all necessary components, wrapped in plastic on a pallet for easy transportation.
When transporting the Topvex SX/C, TX/C units use a forklift placed on the gable of the unit.
Note:
Necessary parts like control panel, supply air sensor (only Topvex SX/C), mounting feet, drainage pipe with
drain trap and electrical safety switch are enclosed at delivery.
Warning
• The unit is heavy. Be careful during transport and installation. Risk of injury through pinching. Use
protective clothing.
• The unit must not be put into operation before the enclosed parts are removed and installed properly.
131677 | A004
To Next Page
Loading...
Need help?
General
