10
| Installation
4.4 Installing the unit
The unit is designed for floor installation. Left and right connections are possible. The unit can be installed in the follow-
ing positions.
Fig. 5 Installing position (left hand units)
Fig. 6 Installing position (right hand units)
Table 2 Symbol description
Symbol Description
Supply air
Exhaust air
Outdoor air
Extract air
4.4.1 Installation procedure
1 Prepare the surface where the unit is to be mounted.
Make sure that the surface is flat, levelled and that it
carries the weight of the unit. Perform the installation
in accordance with local rules and regulations.
2 Lift the unit in place.
Warning
Beware of sharp edges during mounting
and maintenance. Make sure that a proper
lifting device is used. Use protective
clothing.
131677 | A004
To Next Page
Loading...
Need help?
General
