TB8100 Installation Guide Installation 13
© Tait Electronics Limited February 2007
1.8 Installing the Base Station
Caution A TB8100 base station (subrack complete with mod-
ules) can weigh up to 28kg (62lb), or up to 30kg
(66lb) complete with packaging. We recommend
that you have another person help you unpack and
move the base station. The TBAA03-16 carrying
handles will make it easier to move the base station
once it has been unpacked. If necessary, remove the
modules from the subrack before moving it. In all
cases follow safe lifting practices.
1.8.1 Unpacking the Equipment
Unpacking the Base
Station
The TB8100 base station is packed in a strong corrugated cardboard carton
with top and bottom foam cushions. To prevent personal injury and damage
to the equipment, we recommend that two people unpack the base station.
1. Cut the tape securing the flaps at the top of the carton and fold them
flat against the sides
b.
Figure 1.3 Unpacking the TB8100 base station
b
e
g
f
hi
cd
To Next Page
Loading...
Need help?
General
