TC-Helicon VOICELIVE Touch User Manual

ADVANCED LOOPING: SHOTS MODE
Shots mode offers you random-access loop playback. Where Loops
mode allows you to cue loops so that they play one after the other,
Shots mode changes the Favorite buttons into trigger buttons for you
to play loops in any order at any time.
To enter Shots mode
1. Double tap the Slider to go Home if you’re not there already.
2. While holding your finger on the Slider, tap the green Play button.
The display will briefly show >SHOTS. From then on, all of the
Favorite buttons will flash to indicate Shots mode.
Understanding the
SShhoottss
mode display and controls:
11.. LLOOOOPP NNUUMMBBEERR && BBAANNKK DDIISSPPLLAAYY
- Displays the same information
as in Loops mode except briefly after either of the arrows is pressed.
Pressing either of the arrow buttons will temporarily show the next
available bank of loops shown as 1-5, 6-10, ... 20-25.
22.. LLOOOOPP BBEEAATT CCOOUUNNTTEERR -
Same as in Loops mode.
33.. RREECCOORRDD && P
PLLAAYY -
Same operation as in Basic looping mode.
44.. LLOOOOPP BBAANNKK DDOOWWNN && UUNNDDOO -
Tap the left arrow to navigate to
lower loop banks when current bank is 6-10 or higher.
Hold to undo an overdub, copy or clear operation as in Loops mode.
Advanced Looping: Shots Mode
23
1
2
3
6
4
5
7

TC-Helicon VOICELIVE Touch Specifications

General

Brand	TC-Helicon
Model	VOICELIVE Touch
Category	Recording Equipment
Language	English