18
Chapter 5 Using More of Your TV
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote. Select On to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
standby mode when you turn off the TV with the TV
remote. Select On to enable this function.
Note: The CEC functions depend on the
devices connected and it is possible
that some devices may not interoperate
correctly when connected to this TV. The
user manual or the manufacturer of the
problematic devices should be consulted
for further information.
Time Shift
Allows you to pause, fast forward and rewind live TV,
so you don’t have to miss any part of your favourite
programs. Before you use the function, connect
a USB drive to the TV rst. For the rst time, you
should complete the disk setup for the USB drive.
1. Press
on the remote control and select Time
Shift, then press OK to conrm.
2. Follow the directions on the screen to do the disk
setup if you use time shift for the rst time.
3. After the disk setup is done, time shift will start,
and the time shift menu displays on the screen.
4. For later use, press
and select Time Shift.
press OK to display the time shift menu and
operate according to the on-screen prompt.
5. Pressing Stop button stops the time shift and
exits.
- When the time shift menu disappears and
only the timing of the time shift remains on the
screen, you can press
to call out
the time shift menu.
Notes:
- Before you plug the USB drive to TV, make
sure you have backed up the data on the drive
to avoid unforeseen malfunction and data loss.
- We recommend that you use a USB drive with
at least 1GB free space and a disk speed faster
than 5.0MB/sec.
- The bigger the USB drive free space for time
shift, the bigger the recording length.
Quick Access of Time Shift:
Insert a USB disk, press PAUSE(
) on the remote
control, it will access Time Shift automatically.
Using EPG (Electronic Programme
Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. You can navigate, select,
view and record programmes.
1. Press
on the remote control, select Channel >
EPG and press OK/► to enter, or press GUIDE
on the remote control, the Program Guide menu
will appear, which allows you to get information
about the current or next programme playing
on each channel. Navigate through the different
programmes using the ▲/▼/◄/► buttons on the
remote control.
2. Use the related buttons shown at the bottom of
the screen to view EPG.
- Prev day: Press
to display EPG of the
previous day.
- More: Press OK to view more information.
- Program lter: Press to display programme
lter for digital TV programmes.
- Custom schedule: Press the red button to set a
schedule.
- Select date: Press the green button and OK to
select date.
- Schedule list: Press the yellow button to view
your schedule list.
3. Press GUIDE or EXIT to exit EPG.
PVR (Personal Video Recorder)
Allows you to record your favourite TV programs.
Before you use the function, connect a USB drive to
the TV rst.
Note: The feature is available only in selected
products and, due to specic TV network limitations
and country technical requirements, might not
be available in product or place of installation.
Feature might also be blocked by TV network due
to copyright protection (HD content, recording
protection). Please use
on the remote control to
check if the feature is available in your product.
1. Press
on the remote control and select PVR.
2. Press OK/► to enter and select Record. It starts
to record automatically.
3. Press BLUE button on the remote control to
access Settings and use ▲/▼/◄/► to adjust the
recording duration.
4. Press to stop recording manually, the
recorded le will be saved. In normal operation,
the recording will stop automatically when the
recording duration expires.
5. In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
To Next Page
Loading...
Need help?
General
