19
Chapter 5 Using More of Your TV
6. To watch the recorded program, exit PVR mode
rst, Press
and go to TV > Media > PVR, then
select the related record file. Press OK to play. (It
is the same if you record a digital radio program).
Notes:
- This feature is available only for digital non
encrypted channels.
- Before you connect the USB drive to the TV,
make sure you have backed up the data in the
drive to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The TV cannot play les normally if the parameters
of the le exceed the limitations of the system, the
le format is not supported, the le is damaged, or
the le cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a le or transmitting data, otherwise the
system or the drive may be damaged.
Password in Parental Control
- The default password is 1234. You can change it
to a new one.
- The super password is 0423. If you forget your
code, enter the super password to override any
existing codes.
E-Manual
E-Manual is an electronic user manual for the
product. You can nd instructions for the features of
this TV set.
1. Press
on the remote control, select Support >
E-Manual and press OK to enter.
2. Press ◄/► to select the contents and press OK
to enter, then press ▲/▼ to view the instruction
pages. Press
to return to the contents.
3. Press EXIT to exit.
Share&See
Note: Share&See is DLNA-compatible.
Connecting to your PC
Make sure to set up a wired or wireless connection
from your TV to a router rst. Then connect your
PC to your router either through a network cable or
wirelessly.
Adding media from your PC for sharing
Install a DLNA media server on your PC. The simple
and familiar server you may install is Microsoft
Windows Media Player 11 and above. Follow the
instructions below to allow your TV to access the
designated les on your PC.
1. Open the Microsoft Windows Media Player 11.
2. Select Library > Media sharing.
3. Check the checkbox Share my media to.
4. Select the icon of the TV set connected to your
PC.
5. Select Allow to allow the TV set to access your
PC, and select OK to enable the access.
Note: Use the Settings button to customize your
desired settings.
6. Select Library > Add to Library.
7. Select your personal folders or folders of other
users that you can access for sharing.
8. Select Add and press OK to enable the addition.
Share&See application
Select Media from the homepage and press OK to
enter. Then you can view pictures, listen to music or
watch videos, which are stored on your PC.
Supported le formats:
Picture JPEG, PNG, BMP
Music MP3, WMA, LPCM
Video FLV, TS, MP4
Notes:
- Share&See function is set to on by default,
the TV will display the list of available DLNA
servers which are available in local network.
- Content from third-party DLNA servers may not
play correctly on your TV due to compatibility
problems.
- When sharing media les from a PC, certain
features may be unavailable and, due to the le
and encoding formats used, playback issues
may occur.
- Because of network related conditions,
playback of media les may not be error-free.
When this happens, play them from a USB
drive.
Netix Settings
Netix provides on-demand movies and TV shows
delivered via the Internet. Netix is available in
certain countries.Unlimited membership is required.
More information can be found at www.netix.com
<http://www.netix.com/>
.
T-CAST
T-Cast lets you enjoy plenty of videos
,
rich of
applications, and share great contents on large
screen. It also allows you to turn a smart device
into a sophisticated remote control, providing more
features than your normal TV remote control. You