TCL C725 Series User Manual

13
2.
Select the
Subtitle
option, and press
OK
to toggle
between on or o󰀨.
3.
Press to return to previous interface.
Enabling Subtitle Languages on Digital TV
Channels
1.
Press on the remote control, select
Settings >
Channels & Inputs > Channels> Subtitle > Digital
Subtitle Language 1st
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a subtitle language as your
preferred language and press
OK
to conrm.
3.
Press
Up/Down
to select
Digital Subtitle Language
2nd
and press
OK/Right
to enter.
4.
Press
Up/Down
to select a secondary subtitle
language and press
OK
to conrm.
5.
Press to return to previous interface.
Selecting a Subtitle Type on Digital TV
Channels
1.
Press on the remote control, select
Settings
> Channels & Inputs > Channels > Subtitle >
Subtitle Type
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a subtitle type and press
OK
to conrm. You can select
Hearing Impaired
to display the hearing impaired subtitles with your
selected language.
3.
Press to return to previous interface.
Using Teletext
Selecting Decoding Page Language
1.
Press on the remote control, select
Settings
> Channels & Inputs > Channels > Teletext >
Decoding Page Language
and press
OK/Right
to
enter.
2.
Press
Up/Down
to select a proper type of language
in which Teletext will display and press
OK
to
conrm.
3.
Press to return to previous interface.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in di󰀨erent languages. This function
allows you to select an available language as primary
language, which relates to di󰀨erent initial Teletext
pages.
1.
Press on the remote control, select
Settings >
Channels & Inputs > Channels > Teletext > Digital
Teletext Language
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a language and press
OK
to conrm.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
-
you are prompted that there are no channels in TV
mode;
-
you want to update your channels.
1.
In TV mode, press on the remote control, select
(Settings) > Channels & Inputs > Channels >
Channel Scan
and press
OK/Right
to enter.
2.
The TV installs and arranges channels according
to your country or region. Press
Up/Down
to select
Country/Region
, and press
OK/Right
to enter.
Enter the default password 1234 or your own
password in case you have changed the password
in the
(Settings) > System > Parental Controls
menu. Press
Up/Down
to select your country or
region and press
OK
to confirm.
3.
Press
Up/Down
to select
Scan Automatically
and
press
OK
to enter.
4.
Press
Up/Down
to select
Tuner Mode
and press
Left/Right
to select
Cable
or
Antenna
.
5.
Press
Up/Down
to select other options and use
Left/Right
to configure.
6.
After configuration is completed, press
Down
to
select
Search
and press
OK
to start scanning
channels.
7.
The channel search may take a few minutes. After
the automatic search, channels are arranged in
a preset order. If you wish to hide, edit or delete
channels, press on the remote control, select
(Settings) > Channels & Inputs > Channels >
Channel Organizer
and press
OK
to enter.
Note:
If the channel search retrieved only the analog
channels it could be caused by poor broadcasting
and therefore is not covered by manufacturer
warranty. Manufacturers cannot be held
responsible for lack of or poor broadcasting in
some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T/DVB-T2 digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.
Note:
Some options are available only when
Subtitles
is set to on.
Turning On/O󰀨 Subtitles
1.
Press on the remote control, select
Settings >
Channels & Inputs > Channels > Subtitle
and
press
OK/Right
to enter.
Chapter 4 Using More of Your TV

TCL C725 Series Specifications

General

Brand	TCL
Model	C725 Series
Category	LED TV
Language	English