TCL HH132V1 User Manual

7
2.2 Access CPE network
You can connect your devices to the CPE network wiredly or wirelessly as illustrated below.
Access wired network
To establish a wired network connection, connect the wired device to the LAN port of your
CPE using an Ethernet cable.
Access wireless network
To establish a wireless network connection, select the Wi-Fi name (or the SSID) of the CPE
on your wireless devices, and enter the Wi-Fi password.
Note: The default Wi-Fi name and password can be found on the bottom label of your CPE.
If your wireless device is WPS-enabled, you can also access the CPE Wi-Fi network through
a WPS connection.
1) Press the WPS button on your CPE for 3 seconds. The WPS function will be enabled
within 2 minutes.
2) Enable the WPS function of your wireless device to make a WPS connection.

TCL HH132V1 Specifications

General

Brand	TCL
Model	HH132V1
Category	Network Router
Language	English