13
5.2 Network
5.2.1
Set up the WAN connection mode and parameters here. You can set the
connection mode to PPPoE, DHCP or static IP.
PPPoE stands for Point-to-Point Protocol over Ethernet. This is a
network protocol that is mainly used for DSL services whereby individual users
connect to a modem using an Ethernet connection. Enter the username and
password provided by your network service provider and click
.
Dynamic Host Configuration Protocol (DHCP) is a client /server
protocol that automatically provides you with an Internet Protocol (IP) host.
The IP address and related configuration settings such as subnet mask and
default gateway are all automatically assigned. Select
and click
.
Access the internet using a fixed IP address, subnet mask, gateway IP
address and Primary DNS server. These should all be provided by your network
service provider.
5.2.2 Mobile Connection
Here you can set the package flow and enable the flow control switch to
restrict flow usage.
5.2.3
Local area network (LAN) parameters are displayed here.
The default Gateway address is 192.168.1.1.
The default Subnet Mask is 255.255.255.0.
DHCP Server will automatically assign IP addresses to devices on the network.
DHCP is enabled by default. You can set the range of the address pool.
To Next Page
Loading...
Need help?
General
