TCL L49P10FS User Manual

8
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the internet, you must subscribe high speed broadband internet service from your internet service provider.
Your TV can be connected to your home network in two ways:
•Wired,usingtheRJ45(LAN)connectoronthebackpanel.
•Wireless,usingtheinternalwirelessorexternalwirelessUSBadapterandyourhomewirelessnetwork.
Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The
connection method may be different depending on your actual network conguration. If you have any questions about
your home network, please refer to your ISP(Internet Service Provider).
Modem Internet
TV Set
Router
Ethernet
Port on the
back panel
or
Chapter 2 General Operation
Connecting to a wired network
To connect to a wired network:
1. Ensure you have:
•AnethernetcablelongenoughtoreachyourTV
•ArouterormodemwithanavailableEthernetport
•Ahigh-speedinternetconnection
 •AnEthernet (LAN) port on the back of the TV
2. Connect your ethernet cable to the router and to the
Ethernet port on the back of the TV.
3. Use the Network SettingstoconguretheTV.
Connecting to a wireless network
To connect to a wireless network
1. Ensure you have:
• A router broadcasting a high-speed wireless signal
• A high-speed internet connection
2. Use the Network SettingstoconguretheTV.
Wireless Router
Modem
TV Set
Built-in wireless connection
Note:
Some models may have no internal wireless module,
you can use wireless network by inserting external wireless
adapter into USB socket of the TV. Some external wireless
adapters can’t be compatible with the TV.

TCL L49P10FS Specifications

General

Brand	TCL
Model	L49P10FS
Category	LED TV
Language	English