Introduction
Buttons on the TV
4
Sockets
Note: the location and names of the sockets on the TV may vary according to
TV model, and not all sockets available on all models.
SPDIF
SPDIF socket (output)
The SPDIF socket can be used to connect a compatible digital audio receiver.
The HDMI can be used to connect a
blu ray, PC with a compatible video card installed, certain DVD players or a
high-definition compatible digital satellite decoder. This socket p
(High-Definition Multimedia Interface) socket
rovides an
uncompressed digital connection that carries both video and audio data by way of
an integrated mini-plug cable.
HDMI 2 (MHL)
Or
HDMI 1 or HDMI 2 (MHL) socket (input)
Note: Only HDMI sockets with the MHL identification will support the MHL function,
n
MHL stands for Mobile High-definition Link, and allows you to link a MHL capable
mobile device to the television.
HDMI 1
Take a certain model for an example:Take a certain model for an example:
1. MENU button
Brings up the main menu or press to return to the previous menu.(Note: In some menus, MENU also acts
like the OK button on the remote.)
3. PROGRAM UP DOWN button/ PROGRAM
Turns the TV on. (In standby mode.)
Scans up/down through the channel list. In the menu system, they act like the up/down
direction buttons on the remote and adjust menu controls.
PROGRAM UP/DOWN button:
2
. VOLUME UP/DOWN button
Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the
remote and adjust menu controls.
Note: The location and names of the function buttons and power button on the TV may vary according to TV model.
To Next Page
Loading...
Need help?
General
