10 11
4 Mark on the wall using each marking on the template
through the mounting holes.
5 Take away the wall mount template.
6 Drill a screw hole at each marking on the wall.
> 2”
TV
TV
1
3
4
5
2
6
24.8”
7 Insert the wall anchors in the holes on the wall.
(Reserve the rubber cushions for future use)
* The rubber cushions can be used as sound bar mats
when you put the sound bar on the table
8 Insert the supplied screws with the wall brackets into
the hole of the wall anchors.
9 Fix and tighten the wall bracket screws on the wall.(keep
space between the screw cap and the brackets).
10 Pick up the sound bar and attach it to the wall screws,
similar to how you would hang a picture. Make sure
everything is tight.
TV
Mount your Sound Bar on the wall
1 Place the supplied wall mount template on the wall.
Make sure the wall mount template is at least 2 inches
below the center of the TV.
2 Use a level to make sure the wall mount template is
positioned accurately.
3 Use the tape to stick the wall mount template rmly on
the wall.
TV
To Next Page
Loading...
Need help?
General
Weight and Dimensions
