Technicolor MediaAccess TC8715 User Manual

15
2 SETUP
DMS3-CTC-25-114 v1.0
2.2 Power on the MediaAccess Gateway
Procedure
Proceed as follows:
1 Take the power cord that is included with your MediaAccess Gateway.
2 Connect the small end of the power cord to the Power port on the back of the MediaAccess Gateway.
3 Plug the other end of the power cord into an electrical outlet.
4 Wait at least two minutes to allow the MediaAccess Gateway to complete the start up phase.
Power

Technicolor MediaAccess TC8715 Specifications

General

Brand	Technicolor
Model	MediaAccess TC8715
Category	Gateway
Language	English