Technicolor MediaAccess TC8715 User Manual

16
2
SETUP
DMS3-CTC-25-114 v1.0
2.3 Connect your wired devices
Requirements
 Both your network device (for example, a computer, a gaming console, etc.) and MediaAccess Gateway must have a free
Ethernet port.
 Your network device must be configured to obtain an IP address automatically. This is the default setting.
All Ethernet ports on the MediaAccess Gateway are Gigabit Ethernet ports and have a maximum speed of 1 Gbps (Gigabit per
second).
Procedure
Proceed as follows:
1 Take the yellow Ethernet cable that is included in your box.
2 Plug one end of the Ethernet cable into one of the yellow Ethernet ports on the back of the MediaAccess Gateway:
3 Plug the other end of the Ethernet cable into the Ethernet port of your network device.
4 Your network device is now connected to your network. Use the same procedure to connect your other Ethernet devices
(computers, network printers and so on).

Technicolor MediaAccess TC8715 Specifications

General

Brand	Technicolor
Model	MediaAccess TC8715
Category	Gateway
Language	English