70
8
SUPPORT
DMS3-CTC-25-114 v1.0
8.3 MediaAccess Gateway reset and restore options
Reset
By performing a reset you will restart a specific set of services (or the complete MediaAccess Gateway).
Restore
By performing a restore you will reset a specific set of services (or the complete MediaAccess Gateway) and reapply their
factory default settings.
Methods
You can choose between:
Performing a reset (restart) or restore via the Admin Tool.
With this method you can choose to only reset (restart) or restore a specific module of the MediaAccess Gateway or perform
a complete reset/restore of the MediaAccess Gateway.
Reset/restore the MediaAccess Gateway via the Reset button
With this method you can only perform a complete reset (restart) or restore of the MediaAccess Gateway
Performing a reset (restart) or restore via the Admin Tool
Proceed as follows:
1 Browse to the Admin Tool (http://192.168.0.1).
For more information, see “Accessing the Admin Tool” on page 25.
2 On the Troubleshooting menu, click Reset/Reboot Gateway.
3 The Reset/Reboot Gateway page appears. Click:
Reset to restart the MediaAccess Gateway.
Reset WiFi Module to restart just the wireless module only.
Reset WiFi Router to restart the wireless and router modules.
Restore WiFi Settings to activate the MediaAccess Gateway default settings for wireless only. All changes to the default
wireless settings will be undone.
Restore Factory Settings to activate all MediaAccess Gateway default settings. All changes to the default settings will be
undone.
4 The MediaAccess Gateway prompts you to confirm your choice. Click OK.
5 If you selected Restore Factory Settings, the MediaAccess Gateway will restart. In all other cases, no restart is needed.
Reset/restore the MediaAccess Gateway via the Reset button
Proceed as follows:
1 Make sure that the MediaAccess Gateway is turned on.
2 If you want to:
A reset to factory default settings deletes all configuration changes you made. Therefore, after the reset a reconfiguration
of your MediaAccess Gateway or a restore of a previously saved configuration (see “Restoring a previously saved
configuration” on page 29) will be needed.
Also your wireless clients will have to be re-associated, as described in “2.4 Connect your wireless devices” on page 17.
To Next Page
Loading...
Need help?
General
