28
3 MANUAL INSTAL
LATION
DMS-CTC-20120510-0000 v1.0
3.5.1 Managing your Mobile Connection with the
MediaAccess Gateway GUI
Introduction
You can view and manage the parameters of your mobile connection via the MediaAccess Gateway GUI.
Procedure
To manage your mobile USB connection via the MediaAccess Gateway GUI:
1 Browse to the MediaAccess Gateway GUI.
For more information, see “4.1.1 Access” on page 33.
2 On the Broadband Connection menu, click Internet Services.
3 Click View more... for the mobile USB connection. The Overview page of the mobile USB connection is shown.
4 In the location bar, click Configure. The Configure page of the mobile connection appears.
5 Under Mobile Information, update the following fields if necessary:
APN:
The public APN used to access the Internet, or the private APN to access a local network.
Operator Mode:
2G / 3G / automatic (let the MediaAccess Gateway choose the best operator mode)
Pin:
The PIN code of your SIM card.
6 Click Apply to apply your configuration changes.
Configuration changes via the MediaAccess Gateway GUI are automatically saved.
To Next Page
Loading...
Need help?
General
