Technicolor TG588v v2 User Manual

10
1 Getting started
DMS3-CTC-25-42 v1.0
Wireless LED
For more information about the Wireless button, see “Wireless button” on page 8.
WPS LED
For more information about WPS, see “3.1 Connecting your wireless client via WPS” on page 20.
Ethernet LED
TV LED
Upgrade LED
Colour State Description
Green Solid on The wireless interface is enabled, no wireless activity.
Blinking The wireless interface is enabled, wireless activity.
Off The wireless interface is disabled.
Colour State Description
Green Solid On Client successfully registered via WPS.
Orange Blinking WPS registration ongoing.
Red Blinking Error occurred.
Colour State Description
Green Solid on At least one active network device is connected to the Ethernet switch.
Blinking At least one Network device is connected to the Ethernet switch and
sending/receiving data.
Off No active Ethernet devices connected to the Ethernet switch.
Colour State Description
Green Solid on Your Digital TV service is up.
Blinking Your Digital TV service is up and there is activity.
Off Your Digital TV service is down.
Colour State Description
Blue Solid on Software upgrade ongoing
Off No software upgrade ongoing
Do not power off your TG588vv2 or disconnect any cables as long as the Upgrade LED is on. Interrupting the
upgrade procedure may damage your TG588vv2.
NickDJ.co.uk

Technicolor TG588v v2 Specifications

General

Brand	Technicolor
Model	TG588v v2
Category	Modem
Language	English