Technicolor TG588v v2 User Manual

26
3 Wireless networking
DMS3-CTC-25-42 v1.0
3.4.2 Configuring WPA-Enterprise encryption
Requirements
• A RADIUS server must be readily set up on your local network.
Procedure
Proceed as follows:
1 Browse to the TG588vv2 web interface.
For more information, see “4.1.1 Accessing the TG588vv2 web interface from your local network” on page 29.
2 Click Wireless. The Wireless page appears.
3 In the Security Mode list under Access Point, select one of the following modes:
 WPA2
 WPA+WPA2
For more information, see “Encryption types” on page 24.
4 The following RADIUS settings are now available for configuration:
 RADIUS Authentication Server's IP: enter the IP address of your RADIUS server.
 RADIUS Authentication Server's port: enter the WPA RADIUS Port.
 RADIUS Authentication Server's secret: enter the WPA RADIUS Key.
5 Click Save to apply your changes.
6 Reconnect your wireless client(s) to your TG588vv2.
For more information, see “3.2 How to manually connect a wireless client” on page 22.
NickDJ.co.uk

Technicolor TG588v v2 Specifications

General

Brand	Technicolor
Model	TG588v v2
Category	Modem
Language	English