Technicolor TG588v v2 User Manual

55
6 Support
DMS3-CTC-25-42 v1.0
6.4 Reset to factory defaults
Resetting your TG588vv2
If at some point you can no longer connect to the TG588vv2 or you want to make a fresh install, it may be useful to perform
a reset to factory defaults.
Methods
You can choose between:
• Resetting the TG588vv2 via the web interface
• Reset the TG588vv2 via the Reset button
Resetting the TG588vv2 via the web interface
Proceed as follows:
1 Browse to the TG588vv2 web interface.
For more information, see “4.1.1 Accessing the TG588vv2 web interface from your local network” on page 29.
2 Click Gateway. The Gateway page appears.
3 Click Reset.
4 The TG588vv2 restores the factory default configuration and restarts.
Reset the TG588vv2 via the Reset button
Proceed as follows:
1 Make sure the TG588vv2 is turned on.
2 Push the Reset button for at least 7 seconds and then release it.
3 The TG588vv2 restarts.
A reset to factory default settings deletes all configuration changes you made. Therefore, after the reset a
reconfiguration of your TG588vv2 will be needed.
Also your wireless clients will have to be re-associated, as described in “3 Wireless networking” on page 19.
Your system administrator may have disabled the physical reset button of the TG588vv2. In this case, a hardware
reset to defaults is not possible.
Reset
NickDJ.co.uk

Technicolor TG588v v2 Specifications

General

Brand	Technicolor
Model	TG588v v2
Category	Modem
Language	English