Technicolor TG788v v3 User Manual

16
2 Setting up your TG788vv3
DMS3-CTC-25-281 v2.0
2.3 Powering on your TG788vv3
Procedure
Proceed as follows:
1 Plug the connector of the power supply unit into your TG788vv3 power inlet port ( ).
2 Plug the power supply unit into a nearby power outlet.
3 Press the power button to turn on your TG788vv3.
4 The LED turns on. Wait at least two minutes to allow your TG788vv3 to complete the startup phase.
Only use the power supply unit that is supplied with this product, is supplied by your service provider or local product
dealer, or a replacement power supply unit provided by your service provider or local product dealer.
The use of other types of supplies is prohibited.
If you are not sure of the type of power supply needed, consult the product's user documentation or contact your
service provider or local product dealer.

Technicolor TG788v v3 Specifications

General

Brand	Technicolor
Model	TG788v v3
Category	Gateway
Language	English