Technics Quartz ST-G45A User Manual

,
Front Panel Controls and Their
Functions
Power “stand by , on” switch
This switch turns on and off the
secondary circuit power only. The unit is
in the “stand-by” condition when this
switch is set to the “stand by ©” position.
Regardless of the switch setting, the
primary circuit is always “live” as long as
the power cord is connected to an
electrical outlet.
Memory indicator
memo]
This indicator illuminates
when the memory button
is pressed.
FM stereo indicator
(stereo)
This indicator
automatically
illuminates when an FM
stereo broadcast is
being received.
Note:
It will not illuminate if
the FM mode selector
is set to the “mono”
position.
display.
Band
selectors(band
selector)
FM:
Press
this
button
to
listen
to
an
FM
broadcast.
AM:
Press this button to listen to an AM
broadcast.
allocation:
This
button
is
also
used
to
select
a
frequency
step
of
either
9
kHz
or
10
kHz.
When
the
AM
button
is
pressed
for
about
4
seconds,
the
AM
frequency
step
will
change
to
10
kHz
per
step.
(This
step
is
set
to
9
KHz
before
shipment.)
Set
to
the
appropriate
position
for
your
locality.
In
order
to
return
to
the
original
frequency
indication,
press
this
button
for
about
4
seconds
again.
Digital frequency display
The reception frequency of the FM or AM broadcast
selected by using the manual tuning buttons or the
preset tuning buttons is indicated by a digital-type
|
Technics — Quemre syntilesizeg) ani/FM Stereo Tuner ST-Gasa
z ' | el
"BB 10..3
{ |
Channel display
The channel number selected by the preset
tuning buttons is displayed.
Quartz-lock indicator (quartz lock)
This indicator illuminates when tuned precisely to
an FM or AM station.
The indication AM used here includes
both MW and LW for Model ST-G45AL.
Band selectors (band selector)
FM:
Press this button to listen to an FM broadcast.
MW:
Press this button to listen to an MW broadcast.
allocation:
This button is also used to select a frequency
step of either 9 kHz or 10 kHz.
When the MW button is pressed for about 4
seconds, the MW frequency step will change
to 10 kHz per step.
(This step is set to 9 kHz before shipment.)
Set to the appropriate position for your locality.
In order to return to the original frequency
indication, press this button for about 4
seconds again.
LW:
Press this button to listen to an LW broadcast.
freq shift:
When the LW button is pressed for about 2
seconds during reception of an LW
broadcast, the LW frequency will decrease
by about 2 kHz.
So, for example, to receive 153 kHz, tune to
155 kHz, and then press this button.
In order to return to the original frequency
indication, press this button for about 2
seconds again.
ST-G45A
Tuning buttons (tuning)
These buttons are used for tuning to the
desired broadcast station.
Memory button (memory)
This button is used when preset memory setting
of the preset-tuning buttons is made.
Signal-strength indicators (signal strength)
These indicators show the relative strength of
broadcast signals being received by the antenna. The
best condition for reception, for FM and AM, is when
the indicators illuminate completely to the top.
FM mode selector (FM mode)
This unit automatically switches into the stereo mode when a
stereo broadcast is received. Press this button to listen in the
monaural mode. The stereo indicator will not illuminate in the
monaural mode.
Preset-tuning buttons (1~16)
(16 channel random preset tuning)
These buttons are used to preset FM and AM broadcast frequencies into the memory
of this unit, and are also pressed to select the desired preset frequencies.
Note:
Refer to pages 6 and 7 for information concerning preset memory.
—5—
ENGLISH

Technics Quartz ST-G45A Specifications

General

Brand	Technics
Model	Quartz ST-G45A
Category	Tuner
Language	English