To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Technics SA-GX770 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Input Sensitivity (MM) | 2.5mV |
| Input Sensitivity (line) | 200mV |
| Video Connections | Composite |
| Weight | 10.5 kg |
| Type | Audio/Video Receiver |
| Power Output (8 ohms) | 100 W per channel |
| Frequency Response | 10 Hz - 100 kHz |
| Signal to Noise Ratio (MM) | 80 dB |
| Inputs | Phono, CD, Tuner, Tape, Video |
| Outputs | Tape, Video |
| Dimensions | 430 x 158 x 318mm |
Explains using surround and 3 STEREO modes for immersive audio.
Guides on adjusting center mode based on speaker size for effective bass playback.
Guides on balancing speaker output levels using test signals for optimal sound.
Guides on setting delay times for rear speakers to ensure correct sound orientation.
Covers recording audio and video from various sources.
Explains dubbing content from VCR 2 to VCR 1.
Details recording video from VCR 2 with audio from another source.
Describes using the HELP function for operational assistance.
Provides solutions for common operational issues.
Lists detailed technical data of the audio receiver.
Outlines essential safety guidelines for power, polarization, and cord protection.
Advises on proper placement for ventilation, foreign material, magnetism, and heat.
Details placement considerations for ventilation, foreign material, magnetism, and surface.
Provides instructions for cleaning the unit with a soft cloth.
Explains when to seek professional service and user limitations.
Warns about safe listening levels to prevent hearing damage.
Lists all items included with the audio receiver for user verification.
Details the front panel controls specific to the SA-GX770 and SA-GX670 models.
Details the front panel controls specific to the SA-GX470 and SA-G9057 models.
Illustrates how to connect various audio devices like CD players and tape decks.
Shows how to connect video devices like VCRs and TVs to the receiver.
Explains how to connect and position the included FM indoor antenna.
Discusses the use and connection of an FM outdoor antenna.
Details the installation and positioning of the AM loop antenna.
Covers the use and installation of an AM outdoor antenna.
Guides on optimal speaker placement for stereo and Dolby Pro-Logic systems.
Illustrates how to connect front speakers to the receiver's terminals.
Shows how to connect rear speakers for surround sound effects.
Details how to connect the center speaker for Dolby Pro-Logic systems.
Explains how to connect subwoofers, with or without built-in amplifiers.
Guides on turning the unit on/off and selecting speaker systems.
Explains how to select audio sources and adjust volume levels.
Details how to mute sound and adjust tone quality with loudness.
Covers adjusting bass, treble, and sound balance for desired audio quality.
Explains how to connect and use headphones with the receiver.
Addresses issues where sound output stops, referencing the HELP function.
Describes how to tune to specific radio frequencies using numeric buttons.
Explains how to search for stations using the tuning control.
Details the automatic search for strong signal broadcast stations.
Covers adjusting frequency manually using the tuning control.
Explains how to preset favorite radio stations into memory channels.
Guides on automatically searching and storing broadcast stations.
Details how to manually preset specific broadcast stations.
Explains how to recall and listen to stored broadcast stations.
Explains how to use SURROUND mode for depth and movement.
Details using 3 STEREO mode for clear sound and orientation.
Guides on adjusting center mode based on speaker size for effective bass playback.
Details balancing speaker output levels using test signals for optimal sound.
Guides on setting delay times for rear speakers to ensure correct sound orientation.
Covers recording to tape decks or DCCs.
Explains recording audio from sources to VCR 1.
Details dubbing content from VCR 2 to VCR 1.
Guides recording video from VCR 2 with external audio.
Advises against self-repair and recommends professional servicing.
Directs users to service centers for assistance and product details.
Addresses issues related to FM reception and sound quality.
Covers problems encountered during AM broadcast listening.
Lists general problems like power not switching on or no sound.
Details power output, distortion, and other amplifier performance metrics.
Lists FM tuner performance specifications like frequency range and sensitivity.
Provides specifications for the AM tuner section.
Outlines specifications related to the video output.
Includes power consumption and physical dimensions of the unit.
