Technics SL-1200G User Manual

English
(22)
Pitch control
(fine adjustment to pitch)


To measure pitch
The four rows of strobe mirrors around
the edge of the turntable can assist you in
measuring pitch.
The strobe mirrors are lit by the strobe light
(blue LED) synchronizing with the precise
frequency of digital control.
Always use the blue LED to measure the pitch.
ɿ
ɿ
ɿ
ヌプハフ
チチ
ピハピ
チチパ
ノ
チ
ピハピ
テ
Strobe light
1
Press [RESET] to turn off the blue
LED light.
2
Press the pitch range select
button to select the pitch range.

[×2] light on: ±16 %

[×2] light off: ±8 %
3
While the turntable is revolving
Slide [PITCH ADJ].

Pitch can be adjusted between approx.
–8 % and +8 % or approx. –16 % and
+16 % according to your selection.

The numbers represent approximate
percentages for your adjustment.
ヱリヵヤラチモュル
ンユヴユヵ
j
2
Pitch range select
button
Blue LED indicator
Pitch control
RESET button


To reset pitch to the preset value
Press [RESET].
The blue LED indicator lights and the pitch
immediately returns to a preset value regardless
of the [PITCH ADJ] position.
(33-1/3, 45 or 78 rpm)
Attention
 +6.4 % change in pitch when stationary
+3.3 % change in pitch when stationary
Normal turntable speed (33-1/3, 45 or 78
r/min) when stationary
-3.3 % change in pitch when stationary
Strobe
mirrors
22

Technics SL-1200G Specifications

General

Brand	Technics
Model	SL-1200G
Category	Turntable
Language	English