RQT5414
11
1
2
3
121110
98765432
1
MIN SEC
121110
98765432
1
T.FADE
MIN SEC
121110
98765432
1
MIN SECTRACK INDEX
121110
98765432
1
MIN SEC
121110
98765432
1
TRACK MIN SEC
121110
98765432
1
MIN SEC
TIME
MODE
CLEAR
123
TIME
MODE
TIME
FADE
1
9 0
≥10
(Original state)
Elapsed time of track being played
Time remaining on disc
Time remaining on track being played
Elapsed time of entire disc
Other CD play functions
Time fade
With this function you specify a time, and when that time is reached,
the volume is gradually decreased and play ends.
1 While the disc is stopped or paused:
Press [TIME FADE].
2 Press the numeric buttons to specify
the play time.
(5 seconds through 99 minutes and 59 seconds)
For example, to play a disc for 25 minutes and 30 seconds and
then stop: [2] → [5] → [3] → [0]
If you make a mistake while specifying the time, press [CLEAR]
and specify it again.
3 Press [ ].
Five seconds before the specified time “ T.FADE ” flashes, the
volume is gradually decreased, and the disc is paused.
Time fade is canceled simultaneously.
To cancel time fade
Press [ ].
To check the time remaining until fade out
Press [TIME MODE] three times during play.
This function may not work properly if the disc is scratched or soiled.
Time mode selection
While the disc is playing or paused:
Press [TIME MODE].
Each time the button is pressed, the display changes in the order
shown in the illustration.
If play is stopped and then started again, the display returns to its
original state.
For your reference
•During play of tracks numbered above 20;
Display appears as “ ”.
•During program play;
Time for programmed tracks appears for displays and .
•During random play;
Display appears as “ ”, and display as “ ”.
•During CD edit recording ( pages 13 and 14);
Display shows the time remaining on the side of the tape being
recorded on.
•During time fade;
The time remaining until fade out is displayed between displays
and .
To Next Page
Loading...
Need help?
General