RQT5414
12
1
1
2
3
121110
98765432
1
A.CUE
TRACK MIN SEC
121110
98765432
1
A.CUE
TRACK MIN SECINDEX
A-
121110
9876432
1
PEAK
TRACK INDEX MIN SEC
B
5
PEAK SEARCH
AUTO
CUE
1
9 0 ≥10
11 23
RANDOM
Other CD play functions
Auto cue
With this function, play is paused at the beginning (where sound can
be heard) of all tracks, one track at a time.
1 Press [AUTO CUE].
If the disc was playing, play is paused at the beginning of the
next track.
2 Press the numeric buttons to select the
track number.
The unit switches to the play standby mode.
The pause indicator illuminates and the play indicator flashes.
3 Press [ ].
Sound can be heard immediately.
To play tracks successively, press [ ] for each track.
To cancel auto cue
While the disc is playing:
Press [AUTO CUE].
In combination with program play
Instead of step 2 above, program tracks following steps 1 and 2 on
page 9 and then press [ ].
In combination with random play
Instead of step 2 above, press [RANDOM].
This function may not work properly on tracks which have soft sounds
at the beginning, or on tracks which have large amounts of noise, etc.
Peak search
This function searches for the peak level on the disc.
This is convenient when adjusting the recording level on the cassette
deck.
11 Press [PEAK SEARCH].
The search for the peak level is started.
Searching for the peak level takes about 2 minutes and 30 sec-
onds for a 60 minute CD. When the peak level is found, the unit
repeatedly produces an approximately 6 second segment
around the peak level.
22 Adjust the recording level on the cas-
sette deck.
Refer to the operating instructions of your cassette deck for
details on this procedure.
For your reference
Since multiple peaks exist on compact discs, even for the same disc
a different peak level may be found each time a peak search is per-
formed on a disc.
To Next Page
Loading...
Need help?
General