TECHWOOD PLR-85 User Manual

10
Display
1. SURROUND mode indicator
When you select surround mode, the selected function
and surround mode will be displayed.
2. Input source, frequency and level indicator
Function display :
When you press input selection button, the selected input
source will be shown.
Frequency display :
When you select Tuner input source, FM/AM frequency
will be displayed.
Surround Sound Level display :
When you adjust the level of center, rear and delay when
operating unit in surround mode, the level will be dis-
played in dB.
3. Memory Channel indicator
The number of the memory channel which is selected
will be displayed.
4. Delay time indicator
When you select a surround mode, the delay time will
be display in mS.
5. MEMORY indicator
Press the MEMORY button and the MEMO indicator will
light.
If you press the MEMORY button and release instantly,
the indicator will blink 4 times.
This method is used for manual station programming.
If you press the MEMORY button longer than 1/2
second, the indicator will remain lit until the automatic
programming is completed.
6. TAPE Monitor indicator
This indicator will illuminate When you press TAPE
MONITOR button.
7. STEREO indicator
This indicator will illuminate when FM stereo broadcasting
is received. The indicator will not light up on FM mono or
AM broadcasting.
8. TUNED indicator
This indicator will illuminate when a radio station is pre-
cisely tuned.
9. TIMER indicator
This indicator will illuminate when the timer is used.

TECHWOOD PLR-85 Specifications

General

Brand	TECHWOOD
Model	PLR-85
Category	Receiver
Language	English