22
Balancing Relative Volumes among Speakers
1. Press the DOLBY PRO LOGIC button.
2. Set the MASTER VOLUME control to the normal listening
level.
3. Press the CENTER MODE button to select the center
speaker mode you desire,NORMAL, WIDE or PHANTOM
mode.
4. Press the TEST TONE button to send the test tone signal
to each speaker.
5. Adjust the CENTER LEVEL and REAR LEVEL controls
so that test tone volumes are equal on all speakers.
6. Press the TEST TONE button to cease testing.
Adjusting the Delay Time
7. Play any video or audio software with the DOLBY SUR-
ROUND mark.
8. Adjust the delay times as desired in 3 steps by pressing
DELAY TIME button.
Playing Surround Sound
9. Adjust the MASTER VOLUME control for the most appro-
priate overall volume.
Playing Surround Sound
DOLBY PRO LOGIC Surround
Balancing Relative Volumes among Speakers
1. Press the DOLBY 3 STEREO button.
2. Set the MASTER VOLUME control to the normal listening
level.
3. Press the CENTER MODE button to select the center
speaker mode you desire,NORMAL or WIDE mode.
4. Press the TEST TONE button to send the test tone signal
to each speaker.
5. Adjust the CENTER LEVEL controls so that the center
speaker sound level is equal to that of the left speaker
and the right speaker.
6. Press the TEST TONE button to cease testing.
Playing Surround Sound
7. Play any video or audio software with the DOLBY SUR-
ROUND mark.
8. Adjust the MASTER VOLUME control for the most appro-
priate overall volume.
DOLBY 3 STEREO
To Next Page
Loading...
Need help?
General
