TECO JSDAP-20A User Manual

1-3
1-1-3 Servo motor Model Code display
dn-08 (Servo motor Model Code display)
Use dn-08 to display servo motor code and check the servo drive and motor compatibility according to the
table below. If the collocation is discordant with that dn08 presented, reset parameter Cn030 or contact your
supplier. The motor model code is stored in parameter Cn030.
200V Class
dn-08 Display Motor Standards
Cn030 Setting
Drive Model
JSDAP
Motor Model
Watt(KW) Speed(rpm)
Encoder
Specification
H1011 JSMA-(P)SCP5AB 2500
H1015 JSMA-PSCP5A5 15 bit(ABS)
H1017 JSMA-PSCP5A7
0.05 3000
17 bit
H1021 JSMA- (P)SC01AB 2500
H1025 JSMA-PSC01A5 15 bit(ABS)
H1027
10A(1)
JSMA-PSC01A7
0.1 3000
17 bit
H1101 JSMA-PSC02AB 2500
H1102 JSMA-PSC02AH 8192
H1105 JSMA-PSC02A5 15 bit(ABS)
H1107 JSMA-PSC02A7
0.2 3000
17 bit
H1111 JSMA- (P)SC01AB 2500
H1115 JSMA-PSC01A5 15 bit(ABS)
H1117 JSMA-PSC01A7
0.1 3000
17 bit
H1121 JSMA-PLC03AB 2500
H1122 JSMA-PLC03AH 8192
H1125 JSMA-PLC03A5 15 bit(ABS)
H1127 JSMA-PLC03A7
0.3 3000
17 bit
H1141 JSMA-SC04AB 2500
H1142 JSMA-SC04AH 8192
H1145
15A(1)
JSMA-SC04A5
0.4
(Rated 3.5A)
3000
15 bit(ABS)

TECO JSDAP-20A Specifications

General

Brand	TECO
Model	JSDAP-20A
Category	Servo Drives
Language	English