19
18
Earphone jack
MW Antenna Jac
17
16
15
TIME Setting
Display button
12
Memory button (Storing radio stations) /
Batteries type selector
11
DEL ETE & 9/10kHz MW step set button
10
9
ETM (Easy Tuning Mode) button
8
VF (View Frequency) & SCAN button (Frequency)
7
VM (View Memory) & Scan button (Memory)
Battery compartment
6
USB 5V DC-IN jack
5
4
Volume knob
Band selector and Auto Tuning Storage
3
2
Multifunctional tuning knob
1
Power on/off
14
ALARM On/Off & Setting
FM ST. / Lock button
13
3
FM & SW telescopic antenna
Removable Belt Clip
18
IMPORTANT MATTERS FOR USING BATTERIES
1. If no battery has been installed inside for long time, clock
of radio would stop to work. However, pre-stored
frequencies are still kept. Clock would work again after
new batteries being re-installed inside.
2. When the battery power is low, the " " symbol in the
display will flash to alert you for changing new batteries.
Besides it will turns off automatically when the power is
gone.
3. Mix using the used & new batteries would cause damage
of radio and also display the capacity of power incorrectly.
4. In case of radio not to be used for a long period, draw out
the batteries for preventing liquid leakage and damaging
the parts of radio.
PL-360
To Next Page
Loading...
Need help?
General
