7
DELETE MEMORY
1. Delete one memory
- Turn on the radio and press the VM/VF button, causing PAGE and PRESET to appear in the
display's upper right corner.
- Use the numeric keypad, the tuning knob, or the / buttons to select the memory that you
want to delete.
- To delete the memory, press DELETE button with a "B" sound and notice that DEL flashes in the
display. Press the DELETE button again with a long "B --" sound to confirm.
2. Delete a memory page
- Turn on the radio and select the page that you want to delete by pressing PAGE, note that PAGE
flashes in the display's upper right. While it's flashing use the numeric keypad, the tuning knob
or the / buttons to select the page that you wish to delete.
- Press and release the VM/VF button so that PAGE and PRESET appear in the display's upper
corner. If [ - - ] appears above PRESET in the display's upper right corner, the page is already
deleted and you don't have to continue.
- Press DELETE for about 3 seconds with a "BB" sound or until starts blinking on the LCD,
press the DELETE button again with a long "B--" sound to confirm.
AUTO SCAN STATION AND PRESET MEMORY
AUTO SCAN STATION
To auto scan station, turn on the radio and select your desired band.
Long press one of the / buttons with a "B" sound to activate the
Auto Scan function. In Auto Scan the radio scans from one station to
the next, stays on the new station for 5 seconds and then moves on.
You can press any button with a "BB" sound to stop the Auto Scan
function.
Frequency status
Frequency
Memory status
Time
AUTO SCAN MEMORY
Turn on the radio and press VM/VF with a "BB" sound, then press one
of the / buttons for about 2 seconds with a "B" sound and notice
that PRESET flashes. The radio scans from one memory to another,
staying on each memory for about 5 seconds.
You can press any button with a "BB" sound to stop Auto Scan and
listen to your favorite broadcast.
Frequency
Page and Preset
To Next Page
Loading...
Need help?
General
