8
~220V
AC CORD
USING BATTERIES
- Open the battery compartment cover and insert
4 x UM 1 (D size) batteries according to the polarity
diagram imprinted on the battery compartment floor.
- The S-2000 has a battery power indicator in the
LCD. Fresh batteries will show a full power level
of 3 bars. If the indicator shows one bar or the
sound becomes weak and distorted, replace the
batteries.
- The radio will turn off automatically if the batteries
become too weak.
- Check the batteries periodically for leakage. As a
precaution, remove the batteries to prevent possible
leakage if it is to be stored for long periods without
use.
POWER SUPPLY
Batteries insertion
POWER BY AC (For Asia market)
Open the AC power cord compartment, pull out the
220V AC cord and plug it into the wall outlet.
USING DC ADAPTER
Connect the adaptor, first to the wall outlet, then to
the S-2000 (Assure the unit is turned off).
NOTE:
- Adapter: DC 6V/500mA, negative polarity
- If there's a power failure with the AC or the AC
adaptor and batteries installed, the batteries will
take over and supply power to the radio.
(For Europe market)
~220V
AC CORD
S-2000 OPERATION MANUAL
To Next Page
Loading...
Need help?
General
