Tektronix AWG7082C Quick Start Manual

Getting Acquain
tedwithYourInstrument
Digital Output (Option 03)
Option 03 supports digital data output on AWG5002C, AWG5012C, AWG5002B, and AWG5012B instruments.
1. The SMB connectors for 14 bit digital
data output are present for Ch 1 and
Ch 2 on the rear panel.
2. You can set the output parameters as
follows:
Digital Amplitude/Offset
Digital High/Low
The digita
l output levels are fixed as
follows:
–1.0 V to +2.7 V, into 50 Ω
0.01 V resolution
Quick Tip
Each channel has independent output on and off control. When the output status of Ch n is set to On, both analog
outp
ut and digital output are enabled.
AWG5000 and AWG7000 Series Quick Start User Manual 39

Tektronix AWG7082C Specifications

General

Brand	Tektronix
Model	AWG7082C
Category	Portable Generator
Language	English