Tektronix DPO2012 Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
<QString> is th
e network domain name, enclosed in quotes.
Examples
ETHERNET:DOMAINNAME “Alpha1.Mycorp.com” sets the domain name that
the oscilloscope uses to communicate with t
he network.
ETHERnet:ENET:ADDress? (Query Only)
Returns the Ethernet address value assigned to the oscilloscope. This is assigned
at the factory and can not be changed.
Group
Ethernet
Syntax
ETHERnet:ENET:ADDress?
Examples
ETHERNET:ENET:ADDRESS? returns an Ethernet address such as
08:00:11:01:02:03
ETHERnet:GATEWay:IPADDress
Sets or returns the remote interface gateway IP address.
Group
Ethernet
Syntax
ETHERnet:GATEWay:IPADDress <QString>
ETHERnet:GATEWay:IPADDress ?
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:GATEWAY:IPADDRESS “128.143.16.1” sets the gateway IP
address.
ETHERnet:HTTPPort
Sets or returns the remote interface HTTP port value.
Group
Ethernet
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-149

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English