Tektronix DPO2012 Programmer's Manual

Command Groups
Bus Command Gr
oup
Use the Bus commands when working with serial bus measurements.
Install the DPO2EMBD application module when working with I
2
CorSPI
bus signals.
Install the DPO2AUTO module when working with CAN or LIN bus signals.
Install the DPO2COMP module when working with RS232 bus signals.
Table2-15: BusCommands
Commands Description
BUS Returns the parameters for each bus
BUS:B<x>:CAN:BITRate Sets or returns the bit rate for the CAN bus
BUS:B<x>:CAN:PRObe Sets or returns the probing method used to
probe the CA N bus
BUS:B<x>:CAN:SAMPLEpoint Sets or r eturns the sample point (in %) to
sample during each bit period
BUS:B<x>:CAN:SOUrce Sets or returns the C AN data source
BUS:B<x>:DISplay:FORMAt Sets the display format for the numerical
information in the specified bus waveform
BUS:B<x>:I2C:ADDRess:RWINClude Sets and returns whether the read/write bit is
included in the address
BUS:B<x>:I2C{:CLOCK|:SCLK}:SOUrce Sets or returns the I2C SCLK source
BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce Sets or returns the I2C SDATA source
BUS:B<x>:LABel Sets or returns the waveform label for the
specified bus
BUS:B<x>:LIN:BITRate Sets or returns the bit rate for LIN
BUS:B<x>:LIN:IDFORmat Sets or returns the L IN ID format
BUS:B<x>:LIN:POLARity Sets or returns the LIN polarity
BUS:B<x>:LIN:SAMPLEpoint Sets or r eturns the sample point (in %) at
which to sample during each bit period
BUS:B<x>:LIN:SOUrce Sets or r eturns the LIN data s ource
BUS:B<x>:LIN:STANDard Sets or returns the LIN standard
BUS:B<x>:PARallel:BIT<x>:SOUrce Sets or returns the parallel bit <x> s ource
BUS:B<x>:PARallel:CLOCK:EDG E Sets or returns the parallel clock edge for
bus <x>
BUS:B<x>:PARallel:CLOCK:ISCLO CKed Sets or returns whether the parallel bus is
clocked
BUS:B<x>:PARallel:CLOCK:SOUrce Sets or returns the parallel bus<x> clock
source
BUS:B<x>:PARallel:WIDth Sets or returns the number of bits used for
the width of the parallel bus <x>
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-13

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English